Descripción del fabricante:

Ultra thin tubes for PCR manufactured in high polished moulds and absolutely free of lubricants, dyes, heavy metals or fillersforms certified DNase-, RNase- and pyrogen free.

Descripción del fabricante:

Our PCR tubes and strip tubes are specifically designed for use in PCR machines and thermal cyclers. The tube walls are ultra thin and consistent, to ensure a fast temperature exchange beetween heatingsystem and sample, resulting in faster cycles. The ultrathin PCR tubes are made from high pure polypropylen in high polished moulds and are free of lubricants, dyes, heavy metals or fillers. Like our other PCR products they are certified DNase-, RNase-und pyrogen free. The unique tube design and the longer cap form and seals compared to other tubes ensures a tight fit and avoids sample evaporation.
The PCR tubes are available with a domed cap or flat cap in clear or colored.

Descripción del fabricante:

• 8-stripes PCR tubes and caps have the same characteristics as the single 0,2ml tubes and are DNase-, RNase and pyrogen free
• the tubes and domed caps are supplied in strips of 8
  uniform well thickness
• leak testing of tubes and caps is an integral part of quality control
• packed in sets of tubes and domed caps saves substantial costs

Descripción del fabricante:

8-strip PCR tubes have same characteristics as the single 0,2ml tubes and are DNase-, RNase and pyrogen free. The tubes are supplied in strips of 8 tubes. Strips in assorted colors are packed separately by individual colors.

Descripción del fabricante:

The Tubes are supplied in strips of 8 tubes ( 0,2ml ) and have the advantage, that an individual or several tubes can be closed, while others are still open. The flat cap form offers also the possibility of easy identification with a pen.

Descripción del fabricante:

• For RT-PCR uniform wall-thickness garants accurate temperature transfer
• only small sample volume needed
• fast heating of enclosed air-volume and limitation of condensation
• packed as 10 Bags à 12 strips
• DNase-, RNase- and pyrogen free, free of human DNA

Descripción del fabricante:

G005: Transparent tubes and caps in Strips of je 12 Tubes (0,2 ml) and Caps each
domed, leakfree closing cap Deckel
packed as 80 Strips of 12 Tubes and 12 caps = 1000 tubes and Caps

G007: transparent 8-tubes and at one end attached domed cap strips, crocodile form

G007.F: transparent 8-tubes and at one end attached flat cap strips, crocodile form
DNase-, RNase- and pyrogen free

Descripción del fabricante:

Only an uniforme wall thickness ensures accurate temperature transfer and therefor an even and precision cycling - reaction. The tubes can be used with a volume as low as 5µl. The maximum wall thickness diference is only +/- 0,05mm. The low profile of the tube strips improves not only the evaporation characteristics but also the light-gain, necessary for ´Real Time PCR´.

Descripción del fabricante:

Our flat and thin wall cap ensures fast heating of the entrapped air and limits any condensation to a minimum. Furthermore, it is extremly clear, allowing external monitoring of the tube´s content without opening. The extra wide optical areas ensure the highest maximum light transference which improves the minimum detection limit. When using PE Cyclers & Biorad iCycler we recommend the use of our ´Low Profile Strip Adapters´.

Descripción del fabricante:

Only an uniforme wall thickness ensures accurate temperature transfer and therefor an even and precision cycling - reaction. The tubes can be used with a volume as low as 5µl. The maximum wall thickness diference is only +/- 0,05mm.

Descripción del fabricante:

Our flat and thin wall cap ensures fast heating of the entrapped air and limits any condensation to a minimum. The dome like shape of the cap improves, in combination with sealing bands, the closure and condensation characteristics, while the flat frosted part of the cap may be written on for identification purposes.

Finally, the cap is equipped with a so - called ´Anti-Contamination-Tab´, that eliminates the effect of sample-to-sample carry-over generated by manual opening.

Descripción del fabricante:

These plates fit to any regular or RT-Cycler. The flat form can be closed by any sealing films of your choice.
Low-Profile-Plates are recommended in case of small sample volumes, as the dead-room will be reduced between sample and heated lid.

Descripción del fabricante:

Our PCR-Plates in microtitre plate format comprises 96 x 0,2ml extra thinwall PCR Tubes, which guarantee a fast temperature exchange beetween heating system and sample.
The PCR Plates are certified DNase- und RNase free and an alternative for laboratories with high quantity of samples. The high profile plates can be sealed with sealing films as well as with our domed(G004) or flat cap strips(G004-F).The PCR-Plates have an alpha-numeric coding system for easy identification and do fit to all comon thermal cyclers. The 96-plates can be cutted into smaller section as required.

Descripción del fabricante:

The 2-Comp-Plate is a combination of two materials: pure polypropylene for transparent reactionplate and polycarbonate for the surounding frame. The two Components are unique connected by a innovative connection system. Both componentes are connected to one form and can be separated later. 
The frame can be reused by setting in a new rection plate.
This provides fexibility regarding purchase and waste of consumables.

Descripción del fabricante:

In addition to above PCR plates we offer further alternatives to use with other special cyclers. These plates have same features as the above described. The full skirt plates are compatible with robotic systems and the holes in the skirt allow an exact handling by robotic arms. The extra space provided by the skirt can be used for bar code labeling

The "half skirt" plate, G060H will fit ideal to the Perkin Elmer cyclers 9600 and 9700, G060/H/1E will fit for all ABI Systems 3700, 3730, 7000, 7700, 7900, GeneAmp 5700, 9600, 9700 and ideal for ABI 3100 sequencer. The flat surface simple mounting of sealing films
. The plate G060H/OA has an elevated skirt on top.
G060/H-W und G060H-1E-W white plates are especial useful for "Lighttyper" Hoffmann-LaRoche.
All plates (exept G060/H1E-OA) are available in different colors, please add the colore-code to the cat.nr. when ordering: B = blue, G = green, R = red, O = orange, V = violet, W=white, Y = yellow.
for sealing options like septa mat and RT-PCR films see sealing options for PCR-Plates.

Descripción del fabricante:

High quality polypropylene, black coding certified DNase-, RNase- and pyrogenfree, low profile“- Plate semi scirted cut corner in Position A1

• the clearnessguaranteesthe optical analysisduring the RT-PCR
• G004-F is usable with our PCR-Plates ( but not-SS type) and 8-tube-strips, cat.nr G002/G002-A
• G006-FC is usable with -SS-type PCR-Plates and 8-tube-strips cat.nr G006/G006-A

• for PCR-Plates, Microtestplates, Deep-Well-Plates
• resistent against contact with agressiv reagents
• piercable with the pipet tip
• temperature range: -80 bis +135°C
• certifiziert DNase- RNase- and pyrogenfree

• low cost standard film for PCR-Plates, microtestplates, deep-well-plates
• resistent against contact with agressiv reagents
• useful to protect light sensitive samples
• certifiziert DNase- RNase- and pyrogenfree

• G040-TS: a sealing film for use at short time high temperatures as e.g. PCR
• dimensions 87 x 120 + 10 mm gripp
• G042: a high quality film for thermal seal of PCR-Plates

• an easy to handle roller
• to close PCR-, microtest and deep-well-plates
• soft roll garants perfect closure
• closing will be safer, faster and tighter as done per hand

Descripción del fabricante:

The thermical sealing method is the most effective one, to seal PCR-plates (96 and 384 Well) and deep-well-plates absolutely tight. The HeatSealer can be used with a lot of different plates and the heat seal avoides safely evaporation or contamination, when PCR-samples are processed or storaged.

The unit is designed to deliver consistent sealing in low and medium throughput laboratories. A simple on board touch pad controls allows the user to adjust sealing temperature and time. Coupled with an audible alarm indicationg sealing completion, the unit provides optimal control and ensures consistency.

Descripción del fabricante:

Heat sealing is the most effective method for sealing PCR-Plates (96- and 384 Well) and deep-well/-storage-plates. Cristallography- and RT-PCR-plates can also sealed with adhesive-films without heat, eliminating fingerprints which could disturb optical clarity or view field.

The MiniSealer table-top sealer is a semi-automated system. It can be used with most brands and sizes of plates.

Operation is simple:the plate is located with the film on top on the stainless steel carrier, set time and temperature and press the start button. The heating block is automatically lowered into contact with film and plate. Temperature and on hold time are microprocessor controled. When the cycle is complete after 1-4 seconds, the block is raised, allowing access to the seale plate.

The system is delivered with an universal support block for SBS footprint plates and a support block for 96-well half and full-skirt plates.

Specificationes: dimensiones: 25x43x45 cm, weight 29,5 kg

• Full scirt plate, compatible with robotic systemes
• 8 grips in scirt for positioning in the robot
• working volumen 50 µl, with siliconemate 40 µl
• alphanumeric identification system
• ultrapure polypropylene
• certified DNase-, RNase- and pyrogen free
• Form-optimized for Sequencer: ABI 3100, 3130, 3700, 3730, 3730X, Amersham MegaBase 4000
• RT-PCR-Cycler: ABI 7900HT
• PCR-Cycler: ABI 2700, 9700, MJ Research Systeme PTC100, 200 und C225, Dyad, Biometra Uno II, T-1, Trobot, Techne Gradient TC-512

• made from special resistant high pure copolymer
• optimized for robotics- and automatisation systems
• no change of form
• 8 grips in the frame for positioning in robot systems
• alphanumerical identification system
• working volumen 48 µl, with silicone mate 30 µl
• certified DNase-, RNase and pyrogen free
• Form-optimized for most blocks of sequencer, RT-PCR-Cycler and PCR-Cycler
• available on request with Barcode

Descripción del fabricante:

The 384 PCR plate is manufactured for "High Throughput Screening" laboratories. The maximum well capacity is 40µl with a working volume of 25µl to accomodate additional DNA replication. The 384 PCR plate is complete compatible with 384 thermal cyclers, like Perkin Elmer 9700, Techne, Hybaid. The surface of the plate is embossed with an alpha-numeric grid for easy well location. The conical flat bottom well ensures even aspiration and the clarity of this ultra pure polypropylen is unsurpassed. They also can be easily labeled for bar coding in robotersystems. The plates are certified DNase-, RNase- and pyrogen free.

Descripción del fabricante:

Our silicone mates are made from ultra pure silicone and therefore very flexible. The mats show an alphanumeric grid system corresponding to the microplates for easy identification. The piercable selfsealing feature ensures, that evaporation and aerosoles are hindered from escaping.
The mats can be cleaned, autoclaved reused and frozen and are certified DNase-, RNase and pyrogen free.

Descripción del fabricante:

Our silicone mates are made from ultra pure silicone and therefore very flexible. The mats show an alphanumeric grid system corresponding to the microplates for easy identification. The piercable selfsealing feature ensures, that evaporation and aerosoles are hindered from escaping.
The mats can be cleaned, autoclaved reused and frozen and are certified DNase-, RNase and pyrogen free.

G068 Compression Mat: garantes vapor lock, avoides evaporation during PCR, also usable in conjunction with sealing films

G078 Expansion-Mat: for Perkin Elmer, seals all tubes in "MicroAmp" Tray.

Descripción del fabricante:

These plates are produced from high pure polypropylene, which is autoclavable. The 96 wells are compatible with multi-channel pipettors and can be used with roborters. As the plates have cylindrcyl walls with round bottom wells, the samples can be repipetted completely, which is not possible with square form wells.

The deep well plates are stackable and cerfified DNase, RNase- pyrogen and metal free, which is ideal for DNA/RNA assays and other enzyme tests.The plates are chemical resistant and widestand deep temperatures up to - 80°C

To close plates, we offer different alternatives as our self adhesive PP and Alu films and autoclavable and piercable high pure silicone mats. The silicone mats are also freezable and feature an alphanumeric grid system.

Descripción del fabricante:

These 96-Well-Plates are made from highest quality medical grade polypropylene.They have an ultra-flat surface and are compatible with HTS and robotic liquid handling equipment (SBS-standard). Applications: sample storage and transport – screening – reagent transfer – HTP and Microtiter assay.
They feature:
available in round bottom (500µl), excellent for gentle cell manipulation and V-bottom (450µl) for efficient sample collection and manipulation
raised "chimney" well rims reduce concernes for cross contamination and prodives surface area for effective heat and adhesive sealing applications
high contrast alphanumeric labeling on each well for efficient well identification
extremly sturdy plate to withstand a wide range of chemicals, solvents and alcohols
usable in temperature range from -80 to 121°C
certified DNase-, RNase and endotoxin free.

Descripción del fabricante:

Silicone mat: ultra pure silicon, very flexibel, alphanummeric coding system, piercable, selfsealing, autoclavable- and reusable.

Breathable Sealing film: porous adhesive filmspecialy designed for use in cell and tissue culture applications. The film seals all types of microplates and effectively allows gas exchange for cellular or bacterial cultivation, while at same time preventing cross-contamination. Cat.# G067 non steril and G067-S steril , dimensions 80x12 mm LxW

PP-Film Cat.Nr. G070: selfsealing film made from PP, suitable tfor sealing tissue culture plates, for short term storage and incubation, temperatureresistant from –40 to +80°C, Dimensions 78 x 120 mm + 10 mm Gripp

Alufilm Kat.Nr. G071: selfsealing, paper backed Aluminium film, temperature resistant from –40 to +135°C, dimensions 78 x 120 mm + 10 mm Gripp
All silicone mats and sealing films are DNase- RNase- and pyrogen free

Descripción del fabricante:

A new square well Plate for "HTS and Drug Discovery Labs" , available in 120µl and 240µl

• excellent chemical resistance, usable from -80°C to +120°C
• standard SBS Foot Print for robotic applications
• 240 µl version for maximized sample storage capacity
• ultraflat surface permits excellent seal with adhesive or heat seal films
• alphanumeric grid for easy well identification
• supporting ribs enhance plate strenght for centrifugation up to 4.000 rcf
  
• Imperma-Mat: autoclavable, usable in temperature range from -80 to 121°C
• reusable, provides a cost effective alternative to other sealing products
• chemical resistant for storage sample which require use uf strong solvents as DMSO
• no extractables - no sample contamination
• plates and mats are certified DNase-, RNase free.

Descripción del fabricante:

A useful help for working with multi-channel pipettors
fillingvolume 55ml, angeled sides and V-shaped bottom for nearly complete sample withdrawal
available in clear PVC or white polystyrene

R047-P: made from transparent polypropylene, autoclavable
to use on both sides, 50 ml or 12 x 5 ml
delivery inclusive lid